Tuesday, October 19, 2010
Star Wars: Visions
Tony Curanaj at Akus Gallery
Emit by Tony Curanaj, oil on canvas, 48" x 34"
Shafer Hall, Room 1, Lower Level
Eastern Connecticut State University
83 Windham Street
Willimantic, CT 06226
Gallery: 860-465-4659
Office: 860-465-4647
Hours:
Tuesday-Wednesday 11am - 5pm
Thursday 1pm - 7pm
Saturday-Sunday 2pm - 5pm
Monday, October 18, 2010
Thomas Kegler solo show
Notes on Jiwoong Cheh's Approach to Cast Sculpture
Plan your method of attack before you start - It is important to understand your process and how you will begin and complete your cast sculpture copy before you even start. This prevents dawdling and aimlessly pushing around clay (or your pencil while cast drawing), hoping for results.
Plan a time limit - If you place time restraints upon yourself, you will be forced to optimize your workflow and keep your brain running at full speed. On a cast drawing, you might say, "I'm going to render this form in two hours." If you make it a manageable but tough goal, you will continue to push yourself, and you can always put in another hour afterwards.
Plan an efficient workspace - In cast sculpture, this might entail making sure both your cast sculpture and cast sculpture copy face you will you work, reducing time spent moving back and forth to check each from the same perspective. In cast drawing, this could mean ensuring that there is sufficient light on your drawing, that you have well-sharpened pencils and the means to sharpen them, and a comfortable proximity to your cast.
Try to work as far as you can before searching out critiques. The cast sculpture is your teacher; if your sculpture does not match the original sculpture, then you must fix it. Try to find the errors yourself. For those of you with a teacher: that teacher will not always be behind you pointing out your errors.
Periodically clean and analyze your sculpture. We (humans) view the world in an analog manner, however, cast sculpture is very much a digital experience. For example; which is easier to measure, the volume of water spilled on the ground (analog), or the number of bricks spilled on the ground (digital)? It is impossible to accurately measure the volume of water by eye alone; on the other hand, the bricks can be counted by eye. As you work on your cast sculpture, the messiness and bumps in the clay can deceive us; a messy/bumpy sculpture is an analog sculpture. Once that sculpture is cleaned and smoothed out to a finish, it becomes possible to understand what is occurring in a digital sense. Now you can accurately compare the plane changes and forms and proceed accordingly. Cast drawing/figure drawing block-ins lines' should also be cleaned up periodically; thick or messy lines can trick you to believe that the line is placed correctly. Erase the thick lines down into the correct thin line (this can be disregarded in some cases; while working through the beginning of a block-in, those extra "pentimento" lines can be useful for identifying the correct line without continually drawing and erasing new lines.)
Saturday, October 16, 2010
Tuesday Lecture: Vasari Paint on Color
Wednesday, October 13, 2010
A Prize to Study in Rome - Applications Due!
THE 2011 ALMA SCHAPIRO PRIZE
The ICA&CA and GCA invites students and professionals committed to the classical tradition to apply for the 2011 Alma Schapiro Prize! The online applications are due by November 1. The winner will spend 3-months at the American Academy in Rome in 2011. The prize includes room, board, a working studio, roundtrip airfare, as well as a modest stipend for expenses. The jury, selected by the ICA&CA, consists of seven individuals whose combined experience will allow fair and well-informed consideration. Previous winners include Michael Grimaldi (2007) and Jeffrey Mims (2009).
Painters or sculptors working in the classical tradition are invited to apply!
Email application questions to: alma.schapiro@gmail.com
No phone calls please.
Saturday, October 9, 2010
Edward Minoff at John Pence Gallery
Friday, October 8, 2010
Finding Shapes - Part 1
To aid us in objectively comparing shapes, we like to imagine each shape as either an animal, or an inanimate object. It requires a dose of imagination, but once a shape is identified as an object or animal, it becomes much easier to understand the shape's intricacies. It's easier to say (and understand visually), "the dolphin's head is too big," rather than, "these three lines need to be compressed to varying degrees."
For an example, here is a Bargue plate that I am currently copying.
Wednesday, October 6, 2010
Sarah Lamb at John Pence Gallery
Sarah Lamb, Model Schooner, Oil on canvas, 48 x 48 inches, 2010
Tuesday, October 5, 2010
Field Trip to Studio EIS
Unfortunately, due to the production environment I was not allowed to take pictures, however, Chris did shed light on the process of creating a figure sculpture at the pace and quality necessary for the level expected from the studio. Essentially, it occurs as follows:
1: Chris receives a project brief with photo reference, model statistics such as age and body measurements, and any direction on the feel/pose of the sculpture.
2: Studio EIS hires a figure model that fits as close to the given measurements as possible. This model is covered in plaster bandages (usually) over their entire body, much like a medical cast for broken bones. This cast is then cut in half, removed, and placed back together, before being filled with foam and reinforced with a metal armature. This method of casting from the live model allows Chris to cut down on unnecessary time spent sculpting parts of the figure that will be covered by clothing.
3: Chris will now use his photo reference and understanding of the human form to sculpt the portrait in water-based clay. Translating the 2d images into an emotive and proportionate 3d sculpture requires much skill; while we were there it was astounding to see Jiwoong Cheh’s (another GCA sculpture teacher and member of Studio EIS) sculpture of a horse jockey done from several press and family photos. Cheh has even sculpted the Kennewick man, a prehistoric man who lived in the Americas, using only the skull provided to him by the historical organization.
4: The head will now be attached to the body, and the figure will be clothed. Often times the organization commissioning the sculpture will provide historically accurate clothing (especially in military sculpture commissions). The figure is dressed using these clothes, and the clothes are then hardened into place using a resin.
5: If there are any parts of the sculpture that are visible or have an effect on the draping of the clothing, Chris will whittle down/build up the plaster cast to be more anatomically correct, since the live figure casts are almost always messy and require clean up and extra work to add that final touch of realism.
6: The sculpture is now complete and ready to head to the foundry to be cast into bronze, steel, wax, etc.
Although GCA is known for its drawing and painting program, the sculpture program is also very robust. We’re required to take sculpture through our years at GCA, beginning with cast sculpture and ending in figure sculpture. I’ve found that sculpture is a lot of fun and has a direct effect on my understanding of form, so I wholeheartedly recommend it. It is also a great way to get some hands on action and take a revitalizing break from the pencil and paper!
See Studio EIS's website: http://www.studioeis.com/
See Chris Waddell's work: http://grandcentralacademy.classicist.org/cwaddell.html
See Jiwoong Cheh's work: http://grandcentralacademy.classicist.org/cheh.html
Saturday, October 2, 2010
September 2010
by Angela Cunningham
by Carla Crawford
by Carla Crawford
by Brendan Johnston
by Carla Crawford
by Katie Whipple
by Victoria Herrera
by Student-Who-Wishes-To-Remain-Annonymous. This is what second year students are doing as part of their figure studies. There is a whole class on saturday devoted to this kind of figure study called "Structure Drawing" taught by Colleen Barry & Will St. John.
Devin Cecil-Wishing in sculpture class
Chris Waddell working with Tony on cast sculpture
Liz & Connor
Gregory Harris Studying in the Cast Hall
this is a demo by Jiwoong Cheh for his figure sculpture class. I didn't get any photos of the student work before they packed up for the month, but they were sculpting from a live model and focusing on defining the muscles and learning their origins and insertions. The sculptures were essentially ecorche figures.
Adventures in hue/value/chroma/composition: here's what everyone's still life paintings looked like on Friday- (they're all still in progress)
by Neal Esplin
by Connie Netherton (she's doing a poster study here)
by Victoria Herrera
by Sam Worley
by Emilie Lee
Friday, October 1, 2010
Connor de Jong joins the blogging team at GCA
the serious student contemplates the task before him
Connor killing it on the ear at school today